D-Link DGS-1510 Series Web Ui Reference Manual page 280

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Access Map Name
Sub Map Number
Action
Counter State
Click the Apply button to accept the changes made for each individual section.
Click the Clear All Counter button to clear the counter information for all the access maps.
Click the Clear Counter button to the clear the counter information for the specified access map.
Click the Find button to locate a specific entry based on the information entered.
Click the Binding button to configure a new match access list.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Binding button, the following page will appear.
Figure 8-104 ACL VLAN Access Map window
Description
Enter the access map's name here. This name can be up to 32
characters long.
Enter the sub-map's number here. This value must be between 1 and
65535.
Select the action that will be taken here. Options to choose from are
Forward, Drop, and Redirect. When the Redirect option is selected,
select the redirected interface from the drop-down list.
Select whether to enable or disable the counter state.
272