D-Link DGS-1510 Series Web Ui Reference Manual page 101

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
More detailed information about the VLAN of the specific interface is displayed.
Click the Back button to return to the previous window.
After click the Edit button, the following window will appear. This is a dynamic window that will change
when a different VLAN Mode was selected. When Access was selected as the VLAN Mode, the
following page will appear.
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
VID
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
When Hybrid was selected as the VLAN Mode, the following page will appear.
Figure 5-16 VLAN Interface Information window
Figure 5-17 Configure VLAN Interface - Access window
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, and Trunk.
Select the acceptable frame behavior option here. Options to choose
from are Tagged Only, Untagged Only, and Admit All.
Select this option to enable or disable the ingress checking function.
Enter the VLAN ID used for this configuration here. This value must be
between 1 and 4094.
93