D-Link DGS-1510 Series Web Ui Reference Manual page 48

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Group Name
User-based Security Model
Security Level
IP Address-List Name
Read View Name
Write View Name
Notify View Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Figure 4-9 SNMP Group Table Settings window
Description
Enter the group name of a maximum of 32 characters. The syntax is
general string that does not allow space.
Select the security model here. Options to choose from are SNMPv1,
SNMPv2c, and SNMPv3.
SNMPv1 - Select to allow the group user to use the SNMPv1 security
model.
SNMPv2c - Select to allow the group user to use the SNMPv2c
security model.
SNMPv3 - Select to allow the group user to use the SNMPv3 security
model.
When selecting SNMPv3 in the User-based Security Model drop-
down list, this option is available.
NoAuthNoPriv - Specify that there will be no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
AuthNoPriv - Specify that authorization will be required, but there will
be no encryption of packets sent between the Switch and a remote
SNMP manager.
AuthPriv - Specify that authorization will be required, and that packets
sent between the Switch and a remote SNMP manger will be
encrypted.
Enter the standard IP access control list (ACL) to associate with the
group.
Enter the read view name that the group user can access.
Enter the write view name that the group user can access.
Enter a write view name that the group user can access. The notify
view describes the object that can be reported its status via trap
packets to the group user.
40