D-Link DGS-1510 Series Web Ui Reference Manual page 409

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
(instance: <Instance-id> add vlan <startvlanid> [- <endvlanid>])
Parameters description:
Instance-id: MST instance id. Instance 0 represents for default instance,
CIST.
startvlanid: The start vid of add vlan range.
endvlanid: The end vid of add vlan range.
Event description: Use to record action to delete a VLAN(s) from an MST instance.
Log Message: Spanning Tree MST configuration ID VLAN mapping table change
(instance: <Instance-id> delete vlan <startvlanid> [- <endvlanid>])
Parameters description:
Instance-id: MST instance id. Instance 0 represents for default instance,
CIST.
startvlanid: The start vid of add vlan range.
endvlanid: The end vid of add vlan range.
Event description: Used to record the event that port role change to alternate due
to guard root.
Log Message: Spanning Tree port role change (Instance :< instance-id >,
<interface-id>) to alternate port due to the guard root
Parameters description:
Instance-id: MST instance id. Instance 0 represents for default instance,
CIST.
Interface_id: The port number which detect the event.
Peripheral
Log Description
Event description: Fan Recovered.
Log Message: Unit <id>, <fan-descr> back to normal.
Parameters description:
Unit <id>: The unit ID.
fan-descr: The FAN ID and position.
Event description: Fan Fail
Log Message: Unit <id> <fan-descr> failed
Parameters description:
Unit <id>: The unit ID.
fan-descr: The FAN ID and position.
Event description: Temperature sensor enters alarm state.
Log Message: Unit <unit-id> <thermal-sensor-descr> detects abnormal
temperature <degree>
Parameters description:
unitID: The unit ID.
thermal-sensor-descr: The sensor ID and position.
degree: The current temperature.
Event description: Temperature recovers to normal.
Log Message: Unit <unit-id> <thermal-sensor-descr> temperature back to normal
Parameters description:
unitID: The unit ID.
401
Informational
Severity
Critical
Critical
Critical
Critical