D-Link DGS-1510 Series Web Ui Reference Manual page 125

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP
Snooping Mrouter Settings, as shown below:
The fields that can be configured for IGMP Snooping Mrouter Settings are described below:
Parameter
VID
Configuration
Unit
From Port / To Port
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.
The fields that can be configured for IGMP Snooping Mrouter Table are described below:
Parameter
VID
Click the Find button to locate a specific entry based on the information entered.
Click the Find All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IGMP Snooping Statistics Settings
This window is used to clear and display the IGMP snooping related statistics.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP
Snooping Statistics Settings, as shown below:
Figure 5-41 IGMP Snooping Mrouter Settings window
Description
Enter a VLAN ID between 1 and 4094.
Select the port configuration. Options to choose from are Port, and
Forbidden Port.
Port - Select to have the configured ports to be static multicast router
ports.
Forbidden Port – Select to have the configured ports not to be
multicast router ports.
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Description
Enter a VLAN ID between 1 and 4094.
117