D-Link DGS-1510 Series Web Ui Reference Manual page 372

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Click the Find button to locate a specific entry based on the information entered.
Click the Refresh button to refresh the display table.
Click the Clear button to clear all the information for the specific ports.
Click the Clear All button to clear all the information in this table.
Click the Show Detail button to see the detail information of the specific port.
After clicking the Show Detail button, the following page will appear.
Figure 11-6 Counters window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
364