Configuration File Backup/Restore; Upload Log File - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
TFTP Server IP
Path\Filename
Click the Download button to update the firmware.
To specify a certain Switch for firmware download, tick its corresponding check box.

Configuration File Backup/Restore

This window is used to upgrade configuration files from the Commander Switch to the Member Switch
using a TFTP server. Member Switches will be listed in the table.
To view the following window, click Management > Virtual Stacking (SIM) > Configuration File
Backup/Restore, as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
Path\Filename
Click the Restore button to update the configuration from a TFTP server to the member switch.
Click the Backup button to back up the configuration file to a TFTP server.

Upload Log File

This window is used to upload log files from SIM member switches to a specified PC.
To view the following window, click Management > Virtual Stacking (SIM) > Upload Log File, as shown
below:
Figure 4-62 Firmware Upgrade window
Description
Enter the TFTP server IP address.
Enter the path and file name.
Figure 4-63 Configuration File Backup/Restore window
Description
Enter the TFTP server IP address.
Enter the path and file name.
79