D-Link DGS-1510 Series Web Ui Reference Manual page 403

Gigabit ethernet smartpro switch
Hide thumbs Also See for DGS-1510 Series:
Table of Contents

Advertisement

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Event description: Record the event when the number of VLANs that loop back has
occurred exceeds a reserved number.
Log Message: Loop VLAN numbers overflow.
Event description: When the ACL hardware resource is exhausted.
Log Message: Web-Authentication cannot work correctly because ACL rule
resource is not available.
LLDP-MED
Log Description
Event description: LLDP-MED topology change detected
Log Message: LLDP-MED topology change detected (on port <portNum>. chassis
id: <chassisType>, <chassisID>, port id: <portType>, <portID>, device class:
<deviceClass>)
Parameters description:
portNum: The port number.
chassisType: chassis ID subtype.
1. chassisComponent(1)
2. interfaceAlias(2)
3. portComponent(3)
4. macAddress(4)
5. networkAddress(5)
6. interfaceName(6)
7. local(7)
chassisID: chassis ID.
portType: port ID subtype.
Value list:
1. interfaceAlias(1)
2. portComponent(2)
3. macAddress(3)
4. networkAddress(4)
5. interfaceName(5)
6. agentCircuitId(6)
7. local(7)
portID: port ID.
deviceClass: LLDP-MED device type.
Event description: Conflict LLDP-MED device type detected
Log Message: Conflict LLDP-MED device type detected ( on port < portNum >,
chassis id: < chassisType>, <chassisID>, port id: < portType>, <portID>, device
class: <deviceClass>)
Parameters description:
portNum: The port number.
chassisType: chassis ID subtype.
1. chassisComponent(1)
2. interfaceAlias(2)
3. portComponent(3)
Value list:
Value list:
395
Critical
Alert
Severity
Notice
Notice

Advertisement

Table of Contents
loading

Table of Contents