D-Link DGS-1510 Series Web Ui Reference Manual page 309

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured for DHCP Snooping Database are described below:
Parameter
Write Delay
Click the Reset button to reset the information entered.
Click the Apply button to accept the changes made.
The fields that can be configured for Store DHCP Snooping Database are described below:
Parameter
URL
Click the Apply button to accept the changes made.
The fields that can be configured for Load DHCP Snooping Database are described below:
Parameter
URL
Click the Apply button to accept the changes made.
Click the Clear button to clear all the counter information.
DHCP Snooping Binding Entry
This window is used to view and configure the DHCP snooping binding entries.
Figure 9-39 DHCP Snooping Database window
Description
Enter the write delay time value here. This value must be between 60
and 86400 seconds. By default, this value is 300 seconds.
Description
Select the location from the drop-down list and enter the URL where
the DHCP snooping database will be stored to here. Location to
choose from is TFTP.
Description
Select the location from the drop-down list and enter the URL where
the DHCP snooping database will be loaded from here. Location to
choose from is TFTP.
301