D-Link DGS-1510 Series Web Ui Reference Manual page 102

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
VLAN Mode
Acceptable Frame
Ingress Checking
Native VLAN
VID
Action
Add Mode
Allowed VLAN Range
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
When Trunk was selected as the VLAN Mode, the following page will appear.
Figure 5-18 Configure VLAN Interface - Hybrid window
Description
Select the VLAN mode option here. Options to choose from are
Access, Hybrid, and Trunk.
Select the acceptable frame behavior option here. Options to choose
from are Tagged Only, Untagged Only, and Admit All.
Select the check box to enable or disable the ingress checking
function.
Tick this option to enable the native VLAN function.
After ticking the Native VLAN check box, this option will be available.
Enter the VLAN ID used for this configuration here. This value must be
between 1 and 4094.
Select the action that will be taken here. Options to choose from are
Add, Remove, Tagged, and Untagged.
Select whether to add an Untagged or Tagged parameters.
Enter the allowed VLAN range information here.
Figure 5-19 Configure VLAN Interface - Trunk window
94