D-Link DGS-1510 Series Web Ui Reference Manual page 89

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Parameter
D-Link Discovery Protocol
State
Report Timer
Click the Apply button to accept the changes made.
The fields that can be configured for DDP Port Settings are described below:
Parameter
Unit
From Port / To Port
State
Click the Apply button to accept the changes made.
Description
Select this option to enable or disable DDP global state.
Select the interval in seconds between two consecutive DDP report
messages. Options to choose from are 30, 60, 90,120, and Never.
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select this option to enable or disable DDP port state.
81