D-Link DGS-1510 Series Web Ui Reference Manual page 168

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Class Map Name
Multiple Match Criteria
Click the Apply button to accept the changes made.
Click the Match button to configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Match button, the following window will appear.
The fields that can be configured are described below:
Parameter
None
Specify
ACL Name
CoS List
DSCP List
Precedence List
Protocol Name
Figure 7-12 Class Map window
Description
Enter the class map name here. This name can be up to 32 characters
long.
Select the multiple match criteria option here. Options to choose from
are Match All and Match Any.
Figure 7-13 Match Rule window
Description
Select this option to match nothing to this class map.
Select the option to match something to this class map.
Select and enter the access list name that will be matched with this
class map here. This name can be up to 32 characters long.
Select and enter the CoS list value that will be matched with this class
map here. This value must be between 0 and 7.
Select and enter the DSCP list value that will be matched with this
class map here. This value must be between 0 and 63. Tick the IPv4
only check box to match IPv4 packets only. If not specified, the match
is for both IPv4 and IPv6 packets.
Select and enter the precedence list value that will be matched with
this class map here. This value must be between 0 and 7. Tick the
IPv4 only check box to match IPv4 packets only. If not specified, the
match is for both IPv4 and IPv6 packets. For IPv6 packets, the
precedence is most three significant bits of traffic class of IPv6 header.
Select the protocol name that will be matched with the class map here.
Options to choose from are None, ARP, BGP, DHCP, DNS, EGP,
FTP, IPv4, IPv6, NetBIOS, NFS, NTP, OSPF, PPPOE, RIP, RTSP,
160