D-Link DGS-1510 Series Web Ui Reference Manual page 174

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Click the Set Action button to configure the action for the policy map.
Click the Policer button to configure the policer action for the policy map.
Click the Delete button to remove the specific entry.
After clicking the Set Action button, the following window will appear.
The fields that can be configured are described below:
Parameter
None
Specify
New Precedence
New DSCP
New CoS
New CoS Queue
Figure 7-17 Policy Map (View Rules) window
Figure 7-18 Set Action window
Description
Select this option to match nothing to this policy map.
Select the option to match something to this policy map.
Select a new precedence for the packet. This value must be between 0
and 7. Tick the IPv4 only to only mark IPv4 precedence. Setting the
precedence will not affect the CoS queue selection.
Select a new DSCP for the packet. This value must be between 0 and
63. Tick the IPv4 only to only mark IPv4 precedence. Setting DSCP
will not affect the CoS queue selection.
Select a new CoS value for the packet. This value must be between 0
and 7. Setting CoS will not affect the CoS queue selection.
Select a new CoS queue for the packet. This value must be between 0
166