D-Link DGS-1510 Series Web Ui Reference Manual page 406

Gigabit ethernet smartpro switch
Hide thumbs Also See for DGS-1510 Series:
Table of Contents

Advertisement

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Event description: Login through SSH unsuccessfully.
Log Message: Login failed through SSH (Username: <username>, IP: <ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Event description: SSH session timed out.
Log Message: SSH session timed out (Username: <username>, IP: <ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Event description: Logout through SSH.
Log Message: Logout through SSH (Username: <username>, IP: <ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
MAC-based Access Control
Log Description
Event description: A host has passed the authentication.
Log Message: MAC-based Access Control host login success (MAC: <mac-
address>, <interface-id>, VID: <vlan-id>).
Parameters description:
mac-address: The host MAC address
interface-id: The interface on which the host is authenticated
vlan-id: The VLAN ID on which the host exists
Event description: A host has aged out.
Log Message: MAC-based Access Control host aged out (MAC: <mac-address>,
<interface-id>, VID: <vlan-id>).
Parameters description:
mac-address: The host MAC address
interface-id: The interface on which the host is authenticated
vlan-id: The VLAN ID on which the host exists
Event description: A host failed to pass the authentication.
Log Message: MAC-based Access Control host login fail (MAC: <mac-address>,
<interface-id>, VID: <vlan-id>).
Parameters description:
mac-address: The host MAC address
interface-id: The interface on which the host is authenticated
vlan-id: The VLAN ID on which the host exists
Event description: The authorized user number on the whole device has reached
the maximum user limit.
Log Message: MAC-based Access Control enters stop learning state.
398
Critical
Informational
Informational
Severity
Informational
Informational
Critical
Warning

Advertisement

Table of Contents
loading

Table of Contents