D-Link DGS-1510 Series Web Ui Reference Manual page 260

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Destination MAC Address
Specify ICMP Message Type
ICMP Message Type
Message Code
IP Precedence
ToS
DSCP
VID
CoS
Time Range
address here. When the MAC option is selected, the Wildcard option
will also be available. Enter the source MAC address and wildcard
value in the spaces provided.
Select and enter the destination information here. Options to choose
from are Any, Host, and MAC. When the Any option is selected, any
destination traffic will be evaluated according to the conditions of this
rule. When the Host option is selected, enter the destination host's
MAC address here. When the MAC option is selected, the Wildcard
option will also be available. Enter the destination MAC address and
wildcard value in the spaces provided.
Select the ICMP message type used here.
When the ICMP Message Type is not selected in the Specify ICMP
Message Type drop-down list, enter the ICMP Message Type
numerical value used here. When the ICMP Message Type is selected
in the Specify ICMP Message Type drop-down list, this numerical
value will automatically be entered.
When the ICMP Message Type is not selected in the Specify ICMP
Message Type drop-down list, enter the Message Code numerical
value used here. When the ICMP Message Type is selected in the
Specify ICMP Message Type drop-down list, this numerical value will
automatically be entered.
Select the IP precedence value used here. Options to choose from are
0 (routine), 1 (priority), 2, (immediate), 3 (flash), 4 (flash-override),
5 (critical), 6 (internet), and 7 (network).
After selecting the IP precedence value, select the Type-of-Service
(ToS) value that will be used here. Options to choose from are 0
(normal), 1 (min-monetary-cost), 2 (max-reliability), 3, 4 (max-
throughput), 5, 6, 7, 8 (min-delay), 9, 10, 11, 12, 13, 14, and 15.
Select or enter the DSCP value used here. This value must be
between 0 and 63.
Enter the VLAN ID that will be associated with this ACL rule here. This
value must be between 1 and 4094.
Select the Class of Service (CoS) value here. Options to choose from
are from 0 to 7.
Enter the name of the time range to associate with this ACL rule.
252