D-Link DGS-1510 Series Web Ui Reference Manual page 104

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured for Global Settings are described below:
Parameter
Surveillance VLAN
Surveillance VLAN ID
Surveillance VLAN CoS
Aging Time
Click the Apply button to accept the changes made.
The fields that can be configured for Port Settings are described below:
Parameter
Unit
From Port / To Port
State
Click the Apply button to accept the changes made.
Figure 5-20 Auto Surveillance Properties window
Description
Select this option to enable or disable the surveillance VLAN state
Enter the surveillance VLAN ID. The range is from 2 to 4094.
Select the priority of the surveillance VLAN from 0 to 7.
Enter the aging time of surveillance VLAN. The range is from 1 to
65535 minutes. The default value is 720 minutes. The aging time is
used to remove a port from surveillance VLAN if the port is an
automatic surveillance VLAN member. When the last surveillance
device stops sending traffic and the MAC address of this surveillance
device is aged out, the surveillance VLAN aging timer will be started.
The port will be removed from the surveillance VLAN after expiration of
surveillance VLAN aging timer. If the surveillance traffic resumes
during the aging time, the aging timer will be reset and stop.
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select this option to enable or disable the state of the port.
96