D-Link DGS-1510 Series Web Ui Reference Manual page 180

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Ethernet Type Mask
CoS
VID
Time Range
Action
Click the Back button to return to the previous window.
Click the Next button to continue.
After clicking the IPv4 radio button and the Next button, the following window will appear.
Figure 8-5 ACL Configuration Wizard (Add Rule for IPv4 ACL) window
This window has a dynamic section. Every selection made in the Protocol Type drop-down list will
change the bottom part of this window.
The fixed fields that can be configured are described below:
Parameter
Sequence No.
Protocol Type
After selecting the TCP option as the Protocol Type, the following section will appear.
hexadecimal value will automatically be entered.
Enter the Ethernet type mask hexadecimal value here. This value must
be between 0x0 and 0xFFFF. When any Ethernet type profile is
selected in the Specify Ethernet Type drop-down list, the appropriate
hexadecimal value will automatically be entered.
Select the CoS value used here. This value is between 0 and 7.
Enter the VLAN ID that will be associated with this ACL rule here. This
value must be between 1 and 4094.
Enter the name of the time range to associate with this ACL rule.
Select the action that this rule will take here. Options to choose from
are Permit and Deny.
Description
Enter the ACL rule number here. This value must be between 1 and
65535. Select Auto Assign to automatically generate an ACL rule
number for this entry.
Select the protocol type option here. Options to choose from are TCP,
UDP, ICMP, EIGRP, ESP, GRE, IGMP, OSPF, PIM, VRRP, IP-in-IP,
PCP, Protocol ID, and None.
172