D-Link DGS-1510 Series Web Ui Reference Manual page 324

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
IPv6 Neighbor Binding
This window is used to view and configure the IPv6 neighbor binding settings.
To view the following window, click Security > IMPB > IPv6 > IPv6 Source Guard > IPv6 Neighbor
Binding, as shown below:
The fields that can be configured for IPv6 Neighbor Binding Settings are described below:
Parameter
MAC Address
VID
IPv6 Address
Unit
From Port / To Port
Click the Apply button to accept the changes made.
The fields that can be configured for IPv6 Neighbor Binding Entry are described below:
Parameter
Unit
From Port / To Port
IPv6 Address
MAC Address
VID
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Figure 9-58 IPv6 Neighbor Binding window
Description
Enter the MAC address used here.
Enter the VLAN ID used here. This value must be between 1 and
4094.
Enter the IPv6 address used here.
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Description
Select the switch unit that will be used for this search here.
Select the appropriate port range used for the search here.
Enter the IPv6 address to find here.
Enter the MAC address to find here.
Enter the VLAN ID to find here.
316