D-Link DGS-1510 Series Web Ui Reference Manual page 199

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
IP Precedence
ToS
DSCP
Time Range
Action
Click the Back button to return to the previous window.
Click the Next button to continue.
After clicking the IPv6 radio button and the Next button, the following window will appear.
Figure 8-20 ACL Configuration Wizard (Add Rule for IPv6 ACL) window
This window has a dynamic section. Every selection made in the Protocol Type drop-down list will
change the bottom part of this window.
The fixed fields that can be configured are described below:
Parameter
Sequence No.
Protocol Type
from are Any, Host, and IP. When the Any option is selected, any
destination traffic will be evaluated according to the conditions of this
rule. When the Host option is selected, enter the destination host's IP
address here. When the IP option is selected, the Wildcard option will
also be available. Enter the group of destination IP addresses by using
a wildcard bitmap. The bit corresponding to the bit value 1 will be
ignored. The bit corresponding to the bit value 0 will be checked.
Select the IP precedence value used here. Options to choose from are
0 (routine), 1 (priority), 2, (immediate), 3 (flash), 4 (flash-override),
5 (critical), 6 (internet), and 7 (network).
After selecting the IP precedence value, select the Type-of-Service
(ToS) value that will be used here. Options to choose from are 0
(normal), 1 (min-monetary-cost), 2 (max-reliability), 3, 4 (max-
throughput), 5, 6, 7, 8 (min-delay), 9, 10, 11, 12, 13, 14, and 15.
Select or enter the DSCP value used here. This value must be
between 0 and 63.
Enter the name of the time range to associate with this ACL rule.
Select the action that this rule will take here. Options to choose from
are Permit and Deny.
Description
Enter the ACL rule number here. This value must be between 1 and
65535. Select Auto Assign to automatically generate an ACL rule
number for this entry.
Select the protocol type option here. Options to choose from are TCP,
191