D-Link DGS-1510 Series Web Ui Reference Manual page 388

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured for IPv4 Trace Route are described below:
Parameter
IPv4 Address
Domain Name
Max TTL
Port
Timeout
Probe Times
The fields that can be configured for IPv6 Trace Route are described below:
Parameter
IPv6 Address
Max TTL
Port
Timeout
Probe Times
Click the Start button to initiate the route trace for each individual section.
After clicking the Start button in IPv4 Trace Route section, the following IPv4 Trace Route Result
section will appear:
Description
Select and enter the IPv4 address of the destination here.
Select and enter the domain name of the destination here.
Enter the Time-To-Live (TTL) value of the trace route request here.
This is the maximum number of routers that a trace route packet can
pass. The trace route option will cross while seeking the network path
between two devices. The range for the TTL is 1 to 60 hops.
Enter the port number here. The value range is from 30000 to 64900.
Enter the timeout period while waiting for a response from the remote
device here. A value of 1 to 65535 seconds can be specified. The
default is 5 seconds.
Enter the probe time number here. The range is from 1 to 9. If
unspecified, the default value is 1.
Description
Select and enter the IPv6 address of the destination here.
Enter the Time-To-Live (TTL) value of the trace route request here.
This is the maximum number of routers that a trace route packet can
pass. The trace route option will cross while seeking the network path
between two devices. The range for the TTL is 1 to 60 hops.
Enter the port number here. The value range is from 30000 to 64900.
Enter the timeout period while waiting for a response from the remote
device here. A value of 1 to 65535 seconds can be specified. The
default is 5 seconds.
Enter the probe time number here. The range is from 1 to 9. If
unspecified, the default value is 1.
380