D-Link DGS-1510 Series Web Ui Reference Manual page 322

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Policy Name
Device Role
Match IPv6 Access List
Target Port
Unit
From Port / To Port
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specified entry.
IPv6 DHCP Guard
This window is used to view and configure the IPv6 DHCP guard settings.
To view the following window, click Security > IMPB > IPv6 > IPv6 DHCP Guard, as shown below:
The fields that can be configured are described below:
Parameter
Policy Name
Device Role
Match IPv6 Access List
Figure 9-55 IPv6 RA Guard window
Description
Enter the policy name here. This name can be up to 32 characters
long.
Select the device role here. Options to choose from are Host and
Router. By default, the device's role is Host, which will block all the
RA packets. If the device's role is Router, RA packets will be
forwarded according to the port's bound ACL.
Enter or select the IPv6 access list to match here.
Tick this option to specify the target port.
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Figure 9-56 IPv6 DHCP Guard window
Description
Enter the policy name here. This name can be up to 32 characters
long.
Select the device role here. Options to choose from are Client and
Server. By default, the device's role is set as Client, which will block
all the DHCPv6 packets from the DHCPv6 Server. If the device's role
is set as Server, DHCPv6 Server packets will be forwarded according
to the port's bound ACL.
Enter or select the IPv6 access list to match here.
314