D-Link DGS-1510 Series Web Ui Reference Manual page 316

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Validation
Click the Apply button to accept the changes made.
IP Source Guard Binding
This window is used to view and configure the IP source guard binding settings.
To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard
Binding, as shown below:
The fields that can be configured for IP Source Binding Settings are described below:
Parameter
MAC Address
VID
IP Address
Unit
From Port / To Port
Click the Apply button to accept the changes made.
The fields that can be configured for IP Source Binding Entry are described below:
Parameter
Unit
From Port / To Port
port(s) here.
Select the validation method used here. Options to choose from are IP
and IP-MAC. Selecting IP means that the IP address of the received
packets will be checked. Selecting IP-MAC means that the IP address
and the MAC address of the received packets will be checked.
Figure 9-49 IP Source Guard Binding window
Description
Enter the MAC address of the binding entry here.
Enter the VLAN ID of the binding entry here.
Enter the IP address of the binding entry here.
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Description
Select the switch unit that will be used for this query here.
Select the appropriate port range used for the query here.
308