D-Link DGS-1510 Series Web Ui Reference Manual page 337

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Virtual URL
Forcible Logout
Redirect State
Redirect Destination
Redirect Delay Time
Click the Apply button to accept the changes made.
The fields that can be configured for Quarantine Server Settings are described below:
Parameter
Timeout
Monitor
URL
Click the Apply button to accept the changes made.
The fields that can be configured for Update Server Settings are described below:
Parameter
IPv4 Network Prefix/Prefix
Length
IPv6 Network Prefix/Prefix
Length
After selecting URL as the Virtual IP, the following field will be
available. Enter the virtual URL used here.
Select to enable or disable the forcible logout option here. When the
forcible logout feature is enabled, a ping packet from an authenticated
host to the JWAC switch with a TTL of 1 will be regarded as a logout
request and the host will be moved back to unauthenticated state.
Select to enable or disable the redirection state here. When redirect is
enabled, all Web access is redirected to the quarantine server or
JWAC login page.
Select the redirect destination here. Options to choose from are
Quarantine Server and JWAC Login Page. When redirecting to the
quarantine server, the unauthenticated host will be redirected to the
quarantine server when it tries to access a random URL. When
redirecting to the JWAC login page, the unauthenticated host will be
redirected to the JWAC login page in the switch to finish
authentication. When redirecting to the quarantine server is specified,
a quarantine server must be configured first before enabling the JWAC
function globally. When redirect is disabled, all Web access is denied
except for access to the quarantine server or JWAC login page.
Enter the redirect delay time value here. This value must be between 0
and 10 seconds. By default, this value 1 second.
Description
Enter the quarantine server's timeout value here. This value must be
between 5 and 300 seconds. By default, this value is 30 seconds.
Select to enable or disable the monitor option here. When the JWAC
quarantine server monitor feature is enabled, the JWAC switch will
monitor the quarantine server to ensure the server is okay. If the
switch detects no quarantine server, it will redirect all unauthenticated
HTTP accesses to the JWAC Login Page if the redirect option is
enabled and the redirect destination is configured to be quarantine
server.
Select the whether the quarantine server uses an IPv4 or IPv6
address and enter the respective IP address in the space provided.
Description
Enter the update server's IPv4 address and prefix length here. Any
servers (like update.microsoft.com or some sites of Antivirus software
companies, which ActiveX needs to access to accomplish the
authentication before the client passes the authentication) should be
added with its IP address or with the network address. By adding the
network address, an entry can serve multiple update servers on the
same network. Multiple update server addresses or network addresses
can be configured.
Enter the update server's IPv6 address and prefix length here.
329