D-Link DGS-1510 Series Web Ui Reference Manual page 374

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured for Mirror Settings are described below:
Parameter
Session Number
Destination
Source
Click the Add button to add the newly configured mirror entry based on the information entered.
Click the Delete button to delete an existing mirror entry based on the information entered.
The fields that can be configured for Mirror Session Table are described below:
Parameter
Mirror Session Type
Figure 11-8 Mirror Settings window
Description
Select the mirror session number for this entry here. This number is
between 1 and 4.
Tick the checkbox, next to the Destination option, to configure the
destination for this port mirror entry.
In the first drop-down menu select the destination type option. Option
to choose from is Port.
After selecting the Port option, select the destination unit and port
number from the second and third drop-down menu.
Tick the checkbox, next to the Source option, to configure the source
for this port mirror entry.
In the first drop-down menu select the source type option. Options to
choose from are Port, and ACL.
After selecting the Port option, select the From Port number and the
To Port number from the second and third drop-down menus. Lastly
select the Frame Type option from the fourth drop-down menu.
Options to choose from as the Frame Type are Both, RX, and TX.
When selecting Both, traffic in both the incoming and outgoing
directions will be mirrored. When selecting RX, traffic in only the
incoming direction will be mirrored. When selecting TX, traffic in only
the outgoing direction will be mirrored.
After selecting the ACL option, enter the ACL profile name in the
space provided.
Description
Select the mirror session type of information that will be displayed from
the drop-down menu. Options to choose from are All Session, and
366