D-Link DGS-1510 Series Web Ui Reference Manual page 251

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Action
Source
Destination
Specify Ethernet Type
Ethernet Type
Ethernet Type Mask
CoS
Inner CoS
VID
Time Range
Click the Back button to discard the changes made and return to the previous page.
Click the Apply button to accept the changes made.
To enable the Counter State option or to enter a Remark for the profile, click the Edit button, next to the
specific ACL profile (found in the ACL profile table).
generate an ACL rule number for this entry.
Select the action that this rule will take here. Options to choose from
are Permit and Deny.
Select and enter the source information here. Options to choose from
are Any, Host, and MAC. When the Any option is selected, any
source traffic will be evaluated according to the conditions of this rule.
When the Host option is selected, enter the source host's MAC
address here. When the MAC option is selected, the Wildcard option
will also be available. Enter the source MAC address and wildcard
value in the spaces provided.
Select and enter the destination information here. Options to choose
from are Any, Host, and MAC. When the Any option is selected, any
destination traffic will be evaluated according to the conditions of this
rule. When the Host option is selected, enter the destination host's
MAC address here. When the MAC option is selected, the Wildcard
option will also be available. Enter the destination MAC address and
wildcard value in the spaces provided.
Select the Ethernet type option here. Options to choose from are aarp,
appletalk, decent-iv, etype-6000, etype-8042, lat, lavc-sca, mop-
console, mop-dump, vines-echo, vines-ip, xns-idp, and arp.
Enter the Ethernet type hexadecimal value here. This value must be
between 0x600 and 0xFFFF. When any Ethernet type profile is
selected in the Specify Ethernet Type drop-down list, the appropriate
hexadecimal value will automatically be entered.
Enter the Ethernet type mask hexadecimal value here. This value must
be between 0x0 and 0xFFFF. When any Ethernet type profile is
selected in the Specify Ethernet Type drop-down list, the appropriate
hexadecimal value will automatically be entered.
Select the CoS value used here. This value is between 0 and 7.
Select the inner CoS value used here. This value is between 0 and 7.
Enter the VLAN ID that will be associated with this ACL rule here. This
value must be between 1 and 4094.
Enter the name of the time range to associate with this ACL rule.
243