D-Link DGS-1510 Series Web Ui Reference Manual page 307

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
DHCP Snooping Port Settings
This window is used to view and configure the DHCP snooping port settings.
To view the following window, click Security > IMPB > IPv4 > DHCPv4 Snooping > DHCP Snooping
Port Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Entry Limit
Rate Limit
When DHCP snooping station move is enabled, the dynamic DHCP
snooping binding entry with the same VLAN ID and MAC address on
the specific port can move to another port if it detects that a new
DHCP process belong to the same VLAN ID and MAC address.
Figure 9-37 DHCP Snooping Port Settings window
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Enter the entry limit value here. This value must be between 0 and
1024. Tick the No Limit option to disable the function.
Enter the rate limit value here. This value must be between 1 and 300.
Tick the No Limit option to disable the function.
299