Starting File Transferring Automatically After Recording; Re-Starting File Transferring (Resume Function); Checking The File Transferring (Job List); Error/Warning Indicator - Sony PXW-X200 Operating Instructions Manual

Starting file transferring
automatically after recording
Set "Auto upload" to "On" to automatically start
transferring the file that is stored on an SD card
after recording.
Note
The target folder is named after the set folder
selected in "Selecting the File and Uploading"
(page 67). When a target folder is not set, it is
named in date format. To change the target folder,
perform settings in "Selecting the file and
uploading."
Re-starting file transferring
(Resume function)
If file transferring fails, the file transferring starts
where transferring failed when re-transferring.
Note
This function is available only on a server that is
compatible with the resume function.
Checking the File Transferring
(Job List)
You can check the list of the files to be uploaded,
the file that is being uploaded, cancel or start the
file upload, and delete the file from the file list.
The camcorder is compatible with the FTP
resume function (re-upload function for a file
whose transfer was suspended).
• "Total": Progress of all the files to be uploaded.
• "Status": Progress of the file that is currently
being uploaded.
• "Remain Time": Estimated remaining time for
uploading.
• "Transfer data rate": Transfer rate indication.
78 About the Web Menu
To cancel or start uploading, or delete a file from
the file list
1
Select the file on the list.
2
Touch at the upper right of the
screen.
Select the item.
• "Abort selected": Cancels uploading the
selected file.
• "Delete from list": Deletes the selected file
from the list.
• "Start selected": Starts uploading the
selected file.
• "Select All": Selects all files on the list.
• "Clear completed": Deletes the list of all
the uploaded files.

Error/Warning Indicator

If the camcorder detects an error on the device
that is connected via wireless LAN, the error
message appears on the "Device Status" screen
(page 73).
Type Error/
warning ID
Hard E01-003
E01-004
E01-005
AV E02-002
Communication E03-001
E03-002
E03-003
E03-004
E03-005
E03-006
E03-007
Media W04-001
W04-002
E04-003
E04-004
W04-005
W04-006
E04-007
* Sony Ci authentication is expired, or FTP server
authentication failed.
Description
Device Error
3G/4G Device Error
Firmware update error
SDI Signal Error
Communication Error
Not supported device
File Transfer Error
Firmware update error
Authentication failed*
Server Capacity Over
IP Address setting
error
No Media
Media Capacity Over
Read Error
Write Error (other
than Media Capacity
Over)
Locked Media
Media Full (reached
to 600 clips)
Not supported media