Reference File - Sony F35 Operation Manual

Reference file

This file stores the standard settings of the camera that can
be used as a reference when adjusting the camera.
If STANDARD is executed on the <SCENE FILE> page of
the PAINT menu or the <REFERENCE> page of the FILE
menu, or with the MSU-900/950 Master Setup Unit,
manually adjusted values of the camera will be reset to the
reference values that have been stored in the reference file.
At shipment, the reference file with the initial settings is
stored in built-in memory.
The initial settings can be modified, as required, then
stored as the new reference file.
For file operation, use the <REFERENCE> page of the
FILE menu. You can also use the MSU-900/950 Master
Setup Unit for file operation.
You can back up the reference file in a "Memory Stick."
Notes
• In Cine mode, the reference file data are fixed as those at
shipment and cannot be modified.
• As relative adjustment values with regard to the
reference file data are stored in a scene file, if data of the
reference file are modified, the scene files also need
modification.
Items stored
The items that are stored in the reference file are marked
with " " in the "R" column of the table in "5-2 List of
a
Items Stored in Files".
User-Gamma file
The gamma-curve data (User Gamma) created using
CvpFileEditor application software can be loaded to the
camera via a "Memory Stick." This enables reproduction
of images closer to those that individual users wish to
reproduce.
For file operation, use the <USER GAMMA> page of the
FILE menu.
The User-Gamma file is stored in built-in memory. Backup
of the User-Gamma file in a "Memory Stick" is not
possible.
Note
In Cine mode, operation of the User-Gamma file via a
"Memory Stick" is not possible.
OHB file
The OHB file stores the offset values of items specific to
the CCD unit.
For file operation, use the <OHB FILE> page of the FILE
menu. You can also use the MSU-900/950 Master Setup
Unit for this operation.
94
File Configuration
Note
In Cine mode, the OHB file can be retrieved automatically,
but the data in the OHB file cannot be modified.
Items stored
The items that are stored in the OHB file are marked with
"a" in the "O" column of the table in "5-2 List of Items
Stored in Files".