Series Copies; Erase Center And/Or Border; Erasing Center - Muratec MFX-2500 Operating Instructions Manual

Advanced features

Series Copies

You can make one-sided copies from two facing pages of book documents.
Note: In this mode, the reduce/enlarge ratio will be set to "Auto" (automatically).
If you want to set the reduction/enlargement ratio manually, set the ratio
after setting the series copies function.
Note: According to the size of document and recording paper you selected, a part
of the image might be lacked.
Note: ADF is not available with this function.
1
Press .
MENU
2
Select "Series Copy" using the cursor key,
and then press [Enter].
3
Select the bound side of the book document
using the cursor key.
If your book document type is read from left
to right, select "L".
If your book document type is read from right to left, select "R".
4
If you want to change the recording paper size, proceed to next step.
Otherwise, skip to step 6.
5
Press [Paper] to select the paper size, and then press [Enter].
6
Press [Enter] to save the setting.
7
The Series copy icon will be displayed on the
.
LCD
8
Set the documents on FBS glass and press
.
START
2.4

Erase center and/or border

Your machine can make copies with erasing the shadow at the center and/or all four
sides of the recording paper.
Erase Center
Note: Your machine has two types of erasing shadow function, Erase Center and
Erase Border. You can use the both functions at a time.
Note: The default setting of the erased margin is as follows:
Erase center: 0.1 inch
Erase border: 0.2 inches
You can change the default setting.

Erasing center

1
Press .
MENU
2
Select "Erase Center" using the cursor key,
and then press [Enter].
3
Enter the center erased margin using the
numeric keypad or pressing the
the cursor key.
Note: You can specify the margin width as follows:
0.1 to 2.0 in 0.1 steps.
4
Press [Enter] to save the setting.
5
The Erase center icon will be displayed on the
.
LCD
6
Set your documents, then press
Erase Border
page 3.1 and 3.2.
and of
.
START