Easystart (Initial Settings); Getting Started; Clearing Stored Settings; Entering Initial Settings - Muratec MFX-1200 Operating Instructions Manual

Getting started

EasyStart (Initial settings)

EasyStart software is already installed on your Muratec fax machine. It guides you
through the process of entering your machine s settings.
These settings you make here can always be changed later.
Getting started
Determine the following before you go any further:
1
The type of dialing your telephone system requires Choose either tone or
pulse (rotary) dialing.
2
The name and fax number you want to appear on your faxes
Every fax page you send arrives at the receiving machine with a single line of
text at the very top of the page. This text lists a name, called the Transmit
Terminal Identifier ( ), and a fax number. The
TTI
characters.

Clearing stored settings

Before using EasyStart, clear your machine s built-in user data memory. This
ensures the memory will hold only your settings.
Important: After you use EasyStart, do not clear the memory again unless an
authorized technician asks you to do so.
To clear the machine s memory:
1
Press Program key, *, 2. The
Clear User Settings
Check Enter/Cancel
Note: If you don t want to clear the memory, just press
2
If you do want to clear the memory, press
1.18
cannot be longer than 22
TTI
now asks if you want to clear the memory:
LCD
.
CANCEL
.
ENTER

Entering initial settings

Important: If you press during EasyStart, your fax machine returns to
STOP
standby mode (its normal condition). But it will keep the settings you
saved by pressing
ENTER
1
Press Program key, ,
I ENTER
The shows the current language setting.
LCD
Language :English
/ /Enter
2
Press or until the language you want appears.
3
Press to save the setting and continue EasyStart.
ENTER
4
The now shows the current calendar/clock setting, with a cursor appear-
LCD
ing under the first digit.
Enter Time
01/01 01 00:00
5
Use the numeric keypad to enter the correct date and time, using a
format for the date and 24-hour format for the time. For instance, to set 8:30
on June 11, 2000, press 0 6 1 1 0 0 2 0 3 0, which results in:
PM
Enter Time
06 / 11 00 20:30
Note: Your fax machine automatically inserts the spaces and date-slash. All
you have to do is enter the digits.
To change a digit, press to move the cursor left, or
Then enter the correct digit.
6
Press to save the clock setting and continue.
ENTER
as described in these instructions.
.
to move it right.
MMDDYY