Using Soft Keys - Muratec MFX-2500 Operating Instructions Manual

Using Soft keys

Soft Keys are shortcut keys. You can register up to four frequently used functions
with the soft keys. Your machine has four Soft Keys.
By factory setting, these keys are programmed the following functions:
• Confirmation stamp for faxing
• Confirmation report for faxing
• Monitor/Call request for faxing
• Memory transmission for faxing
But instead of using the Soft Keys to use the functions above, you can register them
to use the frequent copier functions.
You can register the following copier functions:
• Combine (see page 2.1.)
• Repeat (see page 2.2.)
• Series copy (see page 2.4.)
• Erase Center (see page 2.4.)
• Erase Border (see page 2.5.)
• Binding Margin (see page 2.5.)
• Directional Magnification (see page 2.6.)
• Nega/Posi (see page 2.7.)
• Duplex (see page 2.7.)
• Booklet (see page 2.9.)
Setting the Soft Key
1
Press , [Mach Set].
MENU
2
Select "D.Soft Keys" using the cursor key,
and then press [Enter].
The shows the function name currently
LCD
stored in the Soft key 1.
Note: If you want to see the all four func-
tions currently stored in the soft keys,
press [ShowAll]. However, when you
register the other function
in the Soft Key, you should press
[ShowAll] again to select the Soft Key.
3
Press desired Soft Key (1–4) on the control
panel you want to change. Then press
[Enter].
Note: On the , the highlighted function
LCD
is assigned to the Soft key currently
select. The shaded function are
assigned to other Soft key.
4
Press [CopyFunc].
Note: If you want to assign a fax function,
press [FaxFunc].
5
Select the function you want to assign to the
Soft Key using the cursor key. Then press
[Enter].
6
If you want to set another Soft Key, go back to
step 3.
If you do not want to set any more Soft Keys, press [Exit] or
Now you can use the labels included in your machine's original packaging to label
the Soft Key function you just set.
Advanced features
to finish.
RESET
2.11