Vmps Retry - Cisco Catalyst 3560-X Command Reference Manual

vmps retry

vmps retry
Syntax Description
Defaults
Command Modes
Command History
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-936
Downloaded from www.Manualslib.com
Use the vmps retry global configuration command on the switch stack or on a standalone switch to
configure the per-server retry count for the VLAN Query Protocol (VQP) client. Use the no form of this
command to return to the default setting.
vmps retry count
no vmps retry
count Number of attempts to contact the VLAN Membership Policy Server (VMPS) by the
client before querying the next server in the list. The range is 1 to 10.
The default retry count is 3.
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
This example shows how to set the retry count to 7:
Switch(config)# vmps retry 7
You can verify your setting by entering the show vmps privileged EXEC command and examining
information in the Server Retry Count row.
Command Description
show vmps Displays VQP and VMPS information.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02