Debug Platform Frontend-Controller - Cisco Catalyst 3560-X Command Reference Manual

debug platform frontend-controller

debug platform frontend-controller
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
B-48
Downloaded from www.Manualslib.com
Use the debug platform frontend-controller privileged EXEC command to enable debugging of
front-end controller activity. Use the no form of this command to disable debugging.
debug platform frontend-controller {all | image | led | manager | poe | register | thermal}
no debug platform frontend-controller {all | image | led | manager | poe | register | thermal}
all Display all the debug messages for front-end controller.
image Display Image Manager debug messages.
led Display LED debug messages.
manager Display front-end-controller manager debug messages.
poe Display Power over Ethernet (PoE) debug messages.
register Display Register Access debug messages.
thermal Display thermal debug messages.
Debugging is disabled.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
The undebug platform frontend-controller command is the same as the no debug platform
frontend-controller command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Command Description
show platform Displays counter and status information for the front-end controller
frontend-controller manager and subordinate applications, and displays the hardware and
software information for the front-end controller.
show debugging Displays information about the types of debugging that are enabled.
manuals search engine
Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands
OL-21522-02