Show Controllers Tcam - Cisco Catalyst 3560-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show controllers tcam

Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
OL-21522-02
Downloaded from www.Manualslib.com
Use the show controllers tcam privileged EXEC command to display the state of the registers for all
hardware memory in the system and for all hardware interface ASICs that are content-addressable
memory-controllers.
show controllers tcam [asic [number]] [detail] [ | {begin | exclude | include} expression]
asic (Optional) Display port ASIC hardware information.
number (Optional) Display information for the specified port ASIC number. The range is
from 0 to 15.
detail (Optional) Display detailed hardware register information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Privileged EXEC
Release
12.2(53)SE2
This display provides information that might be useful for Cisco technical support representatives
troubleshooting the switch.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
This is an example of output from the show controllers tcam command:
Switch# show controllers tcam
------------------------------------------------------------------------
TCAM-0 Registers
------------------------------------------------------------------------
REV: 00B30103
SIZE: 00080040
ID: 00000000
CCR: 00000000_F0000020
RPID0: 00000000_00000000
RPID1: 00000000_00000000
RPID2: 00000000_00000000
RPID3: 00000000_00000000
manuals search engine
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show controllers tcam
2-551