Fsck - Cisco Catalyst 3560-X Command Reference Manual

fsck

fsck
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Catalyst 3750-X and 3560-X Switch Command Reference
A-12
Downloaded from www.Manualslib.com
Use the fsck boot loader command to check the file system for consistency.
fsck [-test | -f] filesystem:
-test (Optional) Initialize the file system code and perform extra POST on flash memory.
An extensive, nondestructive memory test is performed on every byte that makes up
the file system.
-f (Optional) Initialize the file system code and perform a fast file consistency check.
Cyclic redundancy checks (CRCs) in the flashfs sectors are not checked.
filesystem: Alias for a flash file system. Use flash: for the system board flash device.
No file system check is performed.
Boot loader
Release Modification
12.2(53)SE2 This command was introduced.
To stop an in-progress file system consistency check, disconnect the switch power and then reconnect
the power.
This example shows how to perform an extensive file system check on flash memory:
switch: fsck -test flash:
manuals search engine
Appendix A Catalyst 3750-X and 3560-X Switch Boot Loader Commands
OL-21522-02