Cisco Catalyst 3560-X Command Reference Manual page 1085

Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands
Defaults
Command Modes
Command History
OL-21522-02
Downloaded from www.Manualslib.com
l3 {acl {input | output} |
ipv6 {acl {input | output} |
local | qos | secondary} |
local | qos | secondary}
read {reg | ssram | tcam}
search
write {forw-ram | reg |
tcam}
Debugging is disabled.
Privileged EXEC
Release
12.2(53)SE2
manuals search engine
Display Layer 3 field-based CAM look-up type debug messages. The
keywords have these meanings:
acl {input | output}—Display input or output ACL look-up debug
•
messages.
ipv6 {acl {input | output} | local | qos | secondary}—Display
•
IPv6-based look-up debug messages. Options include displaying
input or output ACL look-up, local forwarding look-up,
classification and QoS look-up, or secondary forwarding look-up
debug messages.
local—Display local forwarding look-up debug messages.
•
qos—Display classification and quality of service (QoS) look-up
•
debug messages.
secondary—Display secondary forwarding look-up debug
•
messages.
Display hardware-memory-read debug messages. The keywords have
these meanings:
reg—Display hardware-memory-register read debug messages.
•
ssram—Display synchronous static RAM (SSRAM)-read debug
•
messages.
tcam—Display hardware-memory-read debug messages.
•
Display supervisor-initiated hardware-memory-search results debug
messages.
Display hardware-memory-write debug messages. The keywords have
these meanings:
forw-ram—Display forwarding-RAM write debug messages.
reg—Display hardware-memory-register write debug messages.
tcam—Display hardware-memory-write debug messages.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
debug platform tcam
B-77