Cisco Catalyst 3560-X Command Reference Manual page 1144

show platform port-asic
Note
Command Modes
Catalyst 3750-X and 3560-X Switch Command Reference
C-32
Downloaded from www.Manualslib.com
stats {drop | enqueue |
miscellaneous | supervisor}
[asic number | port number
[asic number]]
transmit {port-fifo | queue
| supervisor-sram} [asic
number | port number [asic
number]]
vct [asic number | port
number [asic number]]
version
| begin
| exclude
| include
expression
Though visible in the command-line help strings, the stack {control | dest-map | learning | messages |
mvid | prog-parser | span | stats [asic number | port number [asic number]] keywords are not supported
on switches running the LAN base feature set.
Privileged EXEC
manuals search engine
Appendix C
Display raw statistics for the port ASIC. The keywords have these
meanings:
drop—Display drop statistics.
•
• enqueue—Display enqueue statistics.
miscellaneous—Display miscellaneous statistics.
•
supervisor—Display supervisor statistics.
•
• asic number—(Optional) Display information for the specified
ASIC. The range is 0 to 1.
• port number—(Optional) Display information for the specified port
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
Display transmit information. The keywords have these meanings:
port-fifo—Display the contents of the port-FIFO information
•
register.
queue—Display the contents of the queue information register.
•
supervisor-sram—Display supervisor SRAM information.
•
• asic number—(Optional) Display information for the specified
ASIC. The range is 0 to 1.
port number—(Optional) Display information for the specified port
•
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
Display the VLAN compression table entries for the specified ASIC or
for the specified port and ASIC. The keywords have these meanings:
asic number—(Optional) Display information for the specified
•
ASIC. The range is 0 to 1.
• port number—(Optional) Display information for the specified port
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
Display version and device type information for port ASICs.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Catalyst 3750-X and 3560-X Show Platform Commands
OL-21522-02