Show Cluster Members - Cisco Catalyst 3560-X Command Reference Manual

Hide thumbs Also See for Catalyst 3560-X:
Table of Contents

Advertisement

show cluster members

show cluster members
Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
Catalyst 3750-X and 3560-X Switch Command Reference
2-532
Downloaded from
www.Manualslib.com
Use the show cluster members privileged EXEC command on a switch stack or on a cluster command
switch to display information about the cluster members.
show cluster members [n | detail] [ | {begin | exclude | include} expression]
n
(Optional) Number that identifies a cluster member. The range is 0 to 15.
detail
(Optional) Display detailed information for all cluster members.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Privileged EXEC
Release
Modification
12.2(53)SE2
This command was introduced.
This command is available only on the cluster command switch stack or cluster command switch.
If the cluster has no members, this command displays an empty line at the prompt.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
This is an example of output from the show cluster members command. The SN in the display means
switch number.
Switch# show cluster members
SN MAC Address
Name
0
0002.4b29.2e00 StLouis1
1
0030.946c.d740 tal-switch-1 Fa0/13
2
0002.b922.7180 nms-2820
3
0002.4b29.4400 SanJuan2
4
0002.4b28.c480 GenieTest
This is an example of output from the show cluster members for cluster member 3:
Switch# show cluster members 3
Device 'SanJuan2' with member number 3
Device type:
MAC address:
Upstream MAC address:
Local port:
Upstream port:
Hops from command device: 2
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
|---Upstream---|
PortIf FEC Hops
SN PortIf
0
1
0
Gi0/1
10
0
2
1
Fa0/18
Gi0/1
2
1
Fa0/11
Gi0/2
2
1
Fa0/9
cisco WS-C3750E-24TD-S
0002.4b29.4400
0030.946c.d740 (Cluster member 1)
Gi6/0/1
FEC number:
GI6/0/11
FEC Number:
FEC
State
Up
(Cmdr)
Up
Up
Up
Up
OL-21522-02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3750-x

Table of Contents