Cisco Catalyst 3560-X Command Reference Manual page 958

vlan (global configuration)
Catalyst 3750-X and 3560-X Switch Command Reference
2-926
Downloaded from www.Manualslib.com
Table 2-57 Valid Commands and Syntax for Different Media Types
Media Type Valid Syntax
Ethernet name vlan-name, media ethernet, state {suspend | active}, said said-value, mtu
mtu-size, remote-span, tb-vlan1 tb-vlan1-id, tb-vlan2 tb-vlan2-id
FDDI name vlan-name, media fddi, state {suspend | active}, said said-value,
mtu mtu-size, ring ring-number, parent parent-vlan-id, tb-vlan1 tb-vlan1-id,
tb-vlan2 tb-vlan2-id
FDDI-NET name vlan-name, media fd-net, state {suspend | active}, said said-value, mtu
mtu-size, bridge bridge-number, stp type {ieee | ibm | auto}, tb-vlan1 tb-vlan1-id,
tb-vlan2 tb-vlan2-id
If VTP v2 mode is disabled, do not set the stp type to auto.
Token Ring VTP v1 mode is enabled.
name vlan-name, media tokenring, state {suspend | active}, said said-value,
mtu mtu-size, ring ring-number, parent parent-vlan-id, tb-vlan1 tb-vlan1-id,
tb-vlan2 tb-vlan2-id
Token Ring VTP v2 mode is enabled.
concentrator
name vlan-name, media tokenring, state {suspend | active}, said said-value,
relay function
mtu mtu-size, ring ring-number, parent parent-vlan-id, bridge type {srb | srt},
(TrCRF)
are are-number, ste ste-number, backupcrf {enable | disable},
tb-vlan1 tb-vlan1-id, tb-vlan2 tb-vlan2-id
Token Ring-NET VTP v1 mode is enabled.
name vlan-name, media tr-net, state {suspend | active}, said said-value,
mtu mtu-size, bridge bridge-number, stp type {ieee | ibm}, tb-vlan1 tb-vlan1-id,
tb-vlan2 tb-vlan2-id
Token Ring VTP v2 mode is enabled.
bridge relay
name vlan-name, media tr-net, state {suspend | active}, said said-value,
function (TrBRF)
mtu mtu-size, bridge bridge-number, stp type {ieee | ibm | auto},
tb-vlan1 tb-vlan1-id, tb-vlan2 tb-vlan2-id
Table 2-58 describes the rules for configuring VLANs.
Table 2-58 VLAN Configuration Rules
Configuration
VTP v2 mode is enabled, and you
are configuring a TrCRF VLAN
media type.
VTP v2 mode is enabled, and you
are configuring VLANs other than
TrCRF media type.
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Rule
Specify a parent VLAN ID of a TrBRF that already exists in the
database.
Specify a ring number. Do not leave this field blank.
Specify unique ring numbers when TrCRF VLANs have the same
parent VLAN ID. Only one backup concentrator relay function
(CRF) can be enabled.
Do not specify a backup CRF.
OL-21522-02