Show Platform Stack Manager - Cisco Catalyst 3560-X Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform stack manager

Note
Syntax Description
Command Modes
Command History
Usage Guidelines
OL-21522-02
Downloaded from www.Manualslib.com
Use the show platform stack manager privileged EXEC command to display platform-dependent
switch-stack information.
show platform stack manager {all | counters | trace [sdp [reverse] | state [reverse]]}
[ | {begin | exclude | include} expression]
This command is supported only on Catalyst 3750-X switches.
all
counters
trace [sdp [reverse]]
trace [state [reverse]]
| begin
| exclude
| include
expression
Privileged EXEC
Release
12.2(53)SE2
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
manuals search engine
Display all information for the entire switch stack.
Display the stack manager counters.
Display trace information. The keywords have these meanings:
sdp—(Optional) Display Stack Discovery Protocol (SDP) information.
•
reverse—(Optional) Display trace information in reverse chronological
•
order (from recent to older chronological sequence).
Display trace information. The keywords have these meanings:
state—(Optional) Display stack state machine information.
•
reverse—(Optional) Display trace information in reverse chronological
•
order (from recent to older chronological sequence).
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform stack manager
C-41