Debug Platform Cisp - Cisco Catalyst 3560-X Command Reference Manual

debug platform cisp

debug platform cisp
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
B-38
Downloaded from www.Manualslib.com
Use the debug platform cisp global configuration command to enable platform-level debugging of a
switch that has one or more Client Information Signalling Protocol (CISP)-enabled interfaces. Use the
no form of this command to disable debugging.
debug platform cisp [initialization | interface-configuration | rpc]
no debug platform cisp [initialization | interface-configuration | rpc]
initialization
interface-configuration
rpc
Debugging is disabled.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, start a session from the stack master by using the session switch-number
privileged EXEC command and enter the debug command at the command-line prompt of the stack
member. You also can use the remote command stack-member-number <line> privileged EXEC
command on the stack master switch to enable debugging on a member switch without first starting a
session.
Command
cisp enable
dot1x credentials (global configuration)profile Configures a profile on a supplicant switch.
show cisp
manuals search engine
Appendix B
Enable debugging of the CISP initialization sequence.
Enable debugging of the CISP configuration.
Enable debugging of the CISP RPC requests.
Description
Enables Client Information Signalling Protocol
(CISP)
Displays CISP information for a specified
interface.
Catalyst 3750-X and 3560-X Switch Debug Commands
OL-21522-02