Cisco Catalyst 3560-X Command Reference Manual page 589

Hide thumbs Also See for Catalyst 3560-X:
Table of Contents

Advertisement

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Note
OL-21522-02
Downloaded from
www.Manualslib.com
3) TestPortAsicCam -----------------> B*D*X**IR*
4) TestPortAsicRingLoopback --------> B*D*X**IR*
5) TestMicRingLoopback -------------> B*D*X**IR*
6) TestPortAsicMem -----------------> B*D*X**IR*
7) TestInlinePwrCtlr ---------------> B*D*X**IR*
<output truncated>
If you enter the show diagnostic content switch all command on a non-PoE-capable switch,
information about test 7, TestInlinePwrCtlr, does not appear in the command output.
This example shows how to display the diagnostic test results on a switch. You can also use the show
diagnostic switch command to display these diagnostic results.
Switch> show diagnostic result
Switch 1:
SerialNo : CAT1007R044
Overall diagnostic result: PASS
Test results: (. = Pass, F = Fail, U = Untested)
1) TestPortAsicStackPortLoopback ---> .
2) TestPortAsicLoopback ------------> U
3) TestPortAsicCam -----------------> U
4) TestPortAsicRingLoopback --------> U
5) TestMicRingLoopback -------------> U
6) TestPortAsicMem -----------------> U
7) TestInlinePwrCtlr ---------------> U
This example shows how to display the running tests in a switch stack:
Switch> show diagnostic status
<BU> - Bootup Diagnostics, <HM> - Health Monitoring Diagnostics,
<OD> - OnDemand Diagnostics, <SCH> - Scheduled Diagnostics
====== ================================= =============================== ======
Card
Description
------ --------------------------------- ---------------------
1
2
3
4
====== ================================= =============================== ======
<output truncated>
This example shows how to display the online diagnostic test schedule for a switch:
Switch> show diagnostic schedule
Current Time = 14:39:49 PST Tue Jul 5 2005
Diagnostic for Switch 1:
Schedule #1:
To be run daily 12:00
Test ID(s) to be executed: 1.
manuals search engine
not configured
not configured
not configured
not configured
not configured
Current Running Test
N/A
TestPortAsicStackPortLoopback
TestPortAsicLoopback
TestPortAsicCam
TestPortAsicRingLoopback
TestMicRingLoopback
TestPortAsicMem
N/A
N/A
Catalyst 3750-X and 3560-X Switch Command Reference
show diagnostic
n/a
n/a
n/a
n/a
n/a
Run by
------
N/A
<OD>
<OD>
<OD>
<OD>
<OD>
<OD>
N/A
N/A
2-557

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3750-x

Table of Contents