Debug Platform Remote-Commands - Cisco Catalyst 3560-X Command Reference Manual

Appendix B Catalyst 3750-X and 3560-X Switch Debug Commands

debug platform remote-commands

Note
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Related Commands
OL-21522-02
Downloaded from www.Manualslib.com
Use the debug platform remote-commands privileged EXEC command to enable debugging of remote
commands. Use the no form of this command to disable debugging.
debug platform remote-commands
no debug platform remote-commands
This command is not supported on switches running the LAN base feature set.
This command has no arguments or keywords.
Debugging is disabled.
Privileged EXEC
Release
12.2(53)SE2
The undebug platform remote-commands command is the same as the no debug platform
remote-commands command.
When you enable debugging on a switch stack, it is enabled only on the stack master. To enable
debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Command
show debugging
manuals search engine
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Catalyst 3750-X and 3560-X Switch Command Reference
debug platform remote-commands
B-69