Show Platform Ip Wccp - Cisco Catalyst 3560-X Command Reference Manual

Appendix C Catalyst 3750-X and 3560-X Show Platform Commands

show platform ip wccp

Note
Syntax Description
Command Modes
Command History
Usage Guidelines
OL-21522-02
Downloaded from www.Manualslib.com
Use the show platform ip wccp privileged EXEC command to display platform-dependent Web Cache
Communication Protocol (WCCP) information.
show platform ip wccp {detail | label} [ | {begin | exclude | include} expression]
This command is available only if your switch is running the IP services feature set.
detail Display the platform WCCP details.
label Display the platform WCCP labels.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Privileged EXEC
Release
12.2(53)SE2
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
manuals search engine
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform ip wccp
C-17