Test Adapter, Id 375830-01 - HEIDENHAIN iTNC 530 Service Manual

Hide thumbs Also See for iTNC 530:

Table of Contents

29.2 Test Adapter, ID 375830-01

The test adapter ...

Is the successor of the "Universal measuring adapter"

(see "Universal Measuring Adapter, ID 255480-01" on page 29 – 460) and is completely

Can be connected to all D-Sub and ribbon-cable connectors of HEIDENHAIN units or is

connected in-between.

Requires adapter cables.

Has numbered pin sockets to which, e.g., a multimeter can be connected.

Permits the measuring of signals and voltages during operation of HEIDENHAIN units.

Has 5 prepared pin sockets with eyes to be clipped on the measuring lines. These pin sockets

are located at upper right; if required, they can be connected into the numbered pin sockets.

HEIDENHAIN Service Manual iTNC 530