Heidenhain Service Manual Itnc - HEIDENHAIN iTNC 530 Service Manual

MP
MP7641
30 – 530
Function and input
Handwheel settings
Format:%xxxxxxxxxxxxxx
Input:Bit 0 – HR 410: Entry of interpola-
tion factor
0: Through iTNC keyboard
1: Through PLC Module 9036
Bit 1 – HR 420: With detent positions
0: Without detent positions
1: With detent positions
Bit 2 – HR 420: Axis direction keys and rapid tra-
verse
0: Controlled by the NC
1: Controlled by the PLC
Bit 3 – HR 420: NC Start / NC Stop
0: Controlled by the NC
1: Controlled by the PLC
Behavior/
SW vers.
PLC
RUN

HEIDENHAIN Service Manual iTNC 530