The I/O-Force List - HEIDENHAIN iTNC 530 Service Manual

Hide thumbs Also See for iTNC 530:

Table of Contents

10.2.5 The I/O-FORCE LIST

This diagnosis function is available as of NC software 340490-xx (with programming surface

Independently of the currently running PLC program and the status of the hardware, the PLC

inputs and outputs can be set or reset via the I/O-FORCE LIST.

The I/O-FORCE LIST can overrule safety-relevant monitoring operations in the

PLC program!

This could lead to damage to property or persons.

Make sure that hanging axes are supported!

Consult the machine manufacturer!

Soft key to call the I / O FORCE LIST function

Press this soft key.

Select the inputs and outputs by entering the symbolic or absolute address.

The TABLE, die WATCH LIST oder TRACE IN-CODE can be called before and with the soft

key ADD TO I/O-FORCE LIST inputs and outputs can be added to the I/O-FORCE LIST.

Enter the value 0 or 1 which is to be "forced".

If required, enter a comment.