HEIDENHAIN iTNC 530 Service Manual page 336

Hide thumbs Also See for iTNC 530:

Table of Contents

Corrective action

If you have found out that the interface on the CC 424 is defective ...

If you have detected that the error is outside the control (servo amplifier, motor, cable, etc.):

Exchanging the CC --> See "Exchange of HEIDENHAIN Components" on page 26 – 411.

Start the following routine. --> See "Trouble Shooting: Exchanging Power Modules or Output

Stages of the Same Type" on page 20 – 337

HEIDENHAIN Service Manual iTNC 530

Troubleshooting