File Management Plc Partition (Plc:\) - HEIDENHAIN iTNC 530 Service Manual

Hide thumbs Also See for iTNC 530:

Table of Contents

15.6 File Management PLC Partition (PLC:\)

Calling the PLC

The directory structure is displayed on the left.

The associated files are listed on the right.

Press the following key combination to call the PLC partition:

Select the Programming and Editing operating mode

Call window for code number

After the code number has been entered, the PLC main menu is displayed.

If the dialog READONLY appears on the left side of the screen, the machine manufacturer

has protected the PLC partition with his own code number. As a result, the OEM.SYS

system file cannot be called again. All other PLC files can still be read but cannot be edited

Call Program Management

With the UP and DOWN keys, the corresponding subdirectories or files can be

selected. The selected directory or the selected file are indicated in the header.

With the +/- key you can open and close subdirectories.

Use the LEFT and RIGHT arrow keys to move between the directory and file

side of the screen.

Enter and confirm code number