HEIDENHAIN iTNC 530 Service Manual page 249

Click on Properties to display the following window:




May 2006
Caution
Note down the original settings which you will have to restore later!
For the following changes to the setting of you Ethernet card, you require the corresponding
permissions. Contact your system administrator.
The IP address must not be generated automatically
(DHCP = Dynamic Host Configuration Protocol)!
You require a fixed IP address! Specify this accordingly.
Enter an IP address.
Note
We recommend to use the IP address of the iTNC and to increase or decrease the last place
by one.
Example:
Adress of the iTNC160.1.180.5
Adress of the laptop160.1.180.6 or 160.1.180.4
The subnet mask of your laptop must be identical with that of the iTNC. Enter this accordingly
(the standard gateway is of no significance here)!
Confirm the settings (your laptop may reboot).
16 – 249